Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio in a Ford Figo Aspire?

Model: Ford Figo Aspire MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, see how to remove the car radio in a Ford Figo Aspire, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety.

Start by opening the small upper glove compartment, then remove the inner cover, unscrew the single screw with a Torx screwdriver, and disengage the entire compartment. Next, unscrew the bolt indicated with a 7mm wrench and pry along the perimeter of the console with a plastic spatula if possible.

At this point, you can pull the module out of the dashboard and disconnect the rear connector.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Install a USB Port on Ford Figo/Aspire
How to Install a USB Port on Ford Figo/Aspire
Ford Figo Aspire (2015-2021 / MK 2) To connect a USB port to the radio of the Ford Figo (or Aspire), first remove the radio from the console, as you will need to solder the USB port wir…
How to Replace the Fuel Filter on the Ford Figo Aspire
How to Replace the Fuel Filter on the Ford Figo Aspire
Ford Figo Aspire (2015-2021 / MK 2) Today, in this brief and simple guide, follow the instructions to remove and replace the fuel filter on the Ford Figo Aspire. First, open the hood of…
How to Replace the Key Battery in a Ford Figo Aspire
How to Replace the Key Battery in a Ford Figo Aspire
Ford Figo Aspire (2015-2021 / MK 2) If the button battery inside your Ford Figo Aspire key is completely dead and needs replacing, you must read this mini guide. With the following meth…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos