Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Conditioning Bulbs on the Ford Fiesta MK6

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Air conditioning

See other generations:
Video tutorial

The video starts not with disassembly but with reassembly of the necessary parts to replace the non-functioning small LEDs of the air conditioning on a Ford Fiesta MK6. To access these LEDs, you need to remove the dashboard, extract the car radio, and unscrew the two screws that secure the air conditioning panel.

Remove the panel and detach the rubber seal (be careful as it is very greasy, so it's best to wear gloves to avoid excessive mess) and the metal piece attached to the central knob of the panel.

Disconnect the various connectors and unscrew the central screw of the element that controls the temperature. Unscrew the two screws holding the front of the panel, and at this point, you can replace the non-functioning LEDs.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

Where is the OBD2 port of the Ford Fiesta 6?
Where is the OBD2 port of the Ford Fiesta 6?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To easily locate the OBD2 port inside the cabin of your Ford Fiesta Mk6, just pay attention to the various steps described below and apply them in th…
How to Replace the Rear Light Bulbs on the Ford Fiesta Mk6
How to Replace the Rear Light Bulbs on the Ford Fiesta Mk6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) This guide shows how to replace the rear light bulbs on the Ford Fiesta Mk6. To perform this operation, you need to remove the light assembly from th…
How to replace the air filter of the Ford Fiesta 6
How to replace the air filter of the Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In the following procedure, we will describe all the steps you need to follow in order to successfully replace the engine air filter of your Ford Fie…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos