Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port of the Ford Fiesta 6?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

To easily locate the OBD2 port inside the cabin of your Ford Fiesta Mk6, just pay attention to the various steps described below and apply them in the correct order. First of all, you need to go inside the car and more precisely reach the driver's seat, then open the small compartment located on the left side of the dashboard and subsequently locate the OBD2 port you were looking for. Once you have found it, you can connect any diagnostic tool as long as it is fully compatible with your Ford Fiesta Mk6.


Posted on 13 January 2026 by ScegliAuto


Related tutorials

Where is the OBD2 port located on the 2021 Ford Fiesta?
Where is the OBD2 port located on the 2021 Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In the following guide, you will find the description of all the steps you need to follow in order to find the OBD2 port located inside the cabin of …
Where is the crankshaft position sensor located on the Ford Fiesta?
Where is the crankshaft position sensor located on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) This video shows where the crankshaft position sensor is located on the Ford Fiesta and how to proceed if you need to replace it. As shown, the senso…
How to reset the service light on a Ford Fiesta MK7
How to reset the service light on a Ford Fiesta MK7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today, learn how to reset the service light on a Ford Fiesta MK7. Turn on the ignition in your vehicle and press the menu button to access the genera…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos