Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Diesel Filter on the Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Diesel fuel filter

The diesel filter for the 2.0 engine of this model is the classic cartridge or immersion type filter and is located on the right side of the engine bay, on the passenger side, near the engine side support; once you have removed the plastic cover, the filter seat is easily accessible, disconnect the fuel inlet and outlet pipes by pressing on the appropriate clips, then remove the protective cover and rotate the cap to release and extract the old filter; install the new filter and the new O-ring seal.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on a Ford Kuga
How to Replace the Diesel Filter on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Learn how to remove the diesel filter on a Ford Kuga. Lift the car on a column lift (jack), locate the diesel filter after removing the soundproofing…
How to Replace the Diesel Filter in a Ford Kuga
How to Replace the Diesel Filter in a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Before you begin, open the bonnet of your Ford Kuga. Start by unscrewing and removing the bolts that secure the diesel filter cover, then remove the …
Ford Kuga Diesel Filter Replacement
Ford Kuga Diesel Filter Replacement
Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, learn how to remove and replace the diesel filter of a second-generation Ford Kuga. First, open and lift the bonnet. Use a so…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the fuel filter on the Ford Kuga 2.0? Read answer

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos