Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Automatic Gearbox of the Ford Ranger?

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Warning light – error code

If the automatic gearbox of the Ford Ranger is stuck, it obviously prevents the use of the vehicle. There is a procedure to reset it, which is outlined below: With the gear lever in position P and the brake pedal pressed, turn on the instrument panel, shift the lever to N, and then turn off the panel. After 10 seconds, shift the lever back to P and turn the panel on again, waiting another 10 seconds before moving the gear lever to N. You will see the message 'Transmission Ready' on the dashboard, indicating the procedure was successful.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the automatic window opening in the Ford Ranger pick-up?
How to reset the automatic window opening in the Ford Ranger pick-up?
Ford Ranger (2011-2023 / T6, P375, PX) In this tutorial we can see how to reset the automatic window opening in the Ford Ranger pick-up truck, an extremely simple and quick operation, to b…
How to reset the service light on the Ford Ranger
How to reset the service light on the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) For the manual reset of the service light on the display of the instrument panel of your Ford Ranger, you do not necessarily need to seek the help of…
How to Replace the Automatic Gear Selector on a Ford Ranger
How to Replace the Automatic Gear Selector on a Ford Ranger
Ford Ranger (1998-2011 / MK 3) To replace the automatic gear selector on a Ford Ranger, park the vehicle on a level surface, engage the handbrake, and disconnect the negative termi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos