Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Cylinder of the Ford Expedition

Model: Ford Expedition Un93 - Years: 1997, 1998, 1999, 2000, 2001, 2002
Part: Checks and maintenance

See other generations:
Video tutorial

Removing the ignition cylinder from a 2000 Ford Expedition is a straightforward task that you can do on your own, especially with our short video tutorial that will guide you through the steps. The first step is to insert the key into the ignition switch.

The second step is to insert a key or a screwdriver into the small hole on the side to push the internal lever outward. Once you complete the second step, pull the key outward, and you will see that the cylinder will come out with it.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to replace the rear door lock of the Ford Expedition
How to replace the rear door lock of the Ford Expedition
Ford Expedition (2003-2006 / U222) In this guide we will see the instructions that will allow us to disassemble and replace the lock of the rear door of the Ford Expedition, in simple …
What to Do If the Tailgate is Stuck on the Ford Expedition?
What to Do If the Tailgate is Stuck on the Ford Expedition?
Ford Expedition (2003-2006 / U222) On the Ford Expedition, the trunk tailgate may get stuck due to a malfunction in the lock. In this case, perform the emergency opening by following t…
How to Reset the Oil Light on a 2017 Ford Expedition
How to Reset the Oil Light on a 2017 Ford Expedition
Ford Expedition (2007-2017 / U324) If you don't know how to reset the engine oil light on your 2017 Ford Expedition, don't worry because below you will find all the instructions you ne…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos