Do it yourself
| ||||
|
Ford Expedition - Video tutorial
Model: Ford Expedition
U324
- Years 2007-2017 Replacing the battery of the Ford Expedition remote control, as we can see in this tutorial, is an extremely simple and quick operation. To do this, we won't need any particular tools but only a replacement battery of type CR2032 3V. First of all, we hold down the button on the back and extract the emergency key, then we use it to lever in the indicated slot and unlock the door. Once opened, we remove the old battery, insert the replacement one taking care to respect its direction and reassemble everything.
Posted on 12 May 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.069
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |