Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Ford Expedition

Model: Ford Expedition U553 - Years 2018-2025
Part: Battery

To replace the battery in this vehicle model, refer to the video and follow the instructions below. After opening the hood, locate the battery on the left side and connect the negative terminal first, then the positive terminal. Next, remove the support bolt for the plate at the base. This will free the battery, allowing you to remove it from the compartment and install the new one. Then, reattach the support bolt for the plate at the base and reconnect the positive terminal first, followed by the negative terminal.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery for the Ford Expedition
How to Replace the Key Battery for the Ford Expedition
Ford Expedition (2018-2025 / U553) If you want to learn how to replace the button battery inside the smart remote of your new Ford Expedition (model years 2018-2022), just carefully re…
Where is the fuse box of the Ford Expedition located?
Where is the fuse box of the Ford Expedition located?
Ford Expedition (2003-2006 / U222) If some electrical components in your Ford Expedition are experiencing malfunctions and you want to find out where the respective fuses are located, …
How to Replace the Key Fob Battery in a Ford Expedition
How to Replace the Key Fob Battery in a Ford Expedition
Ford Expedition (2018-2025 / U553) Before starting the procedure to replace the key fob battery in a Ford Expedition, make sure you have the correct battery model, which is a flat CR 2…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos