Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

If you want to remove the factory radio from your Ford Focus, carefully read this guide and follow the steps described. First, ensure you have a cross-head screwdriver, then enter the car and make sure it is turned off. At this point, unscrew the screws located at the bottom of the centre panel and then pull the panel towards you. Disconnect the electrical cable and remove it completely.

Next, locate the radio and remove it to complete the procedure.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Install an Android Radio in a Ford Focus?
How to Install an Android Radio in a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To install the Android radio in a Ford Focus, you must first remove the old radio. To do this, use a screwdriver to pry and lift the plastic cover su…
Removing the Dashboard Radio from a Ford Focus
Removing the Dashboard Radio from a Ford Focus
Ford Focus (1998-2004 / MK 1) Learn how to replace the radio in a Ford Focus. To replace the car radio, use the removal keys that come with the radio. Insert the keys into the sid…
How to Unlock the Sony Radio in a Ford Focus?
How to Unlock the Sony Radio in a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To unlock the Sony radio in a Ford Focus, turn on the ignition so that the radio can also be powered on. Next, press and hold the buttons 1 and 6 on …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos