Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light bulb

Do you want to replace a damaged bulb on your Ford Focus? This operation is very simple; follow these steps. First, open the boot lid, then use a plastic spatula to detach the cover on the side trim of the boot. Using a screwdriver, unscrew the securing nuts of the rear headlamp, disconnect the power connectors attached to the headlamp, and pull it out from its housing. Replace the damaged bulbs with new ones at hand. Refit the headlamp with the respective securing nuts, reattach the inspection cover, and finally, test the correct operation of the lights.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of a Ford Focus
How to Replace the Front Headlight Bulb of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you begin, open the front bonnet of your Ford Focus. Start by unscrewing and removing the screws that secure the front headlamp. Next, pull th…
Replacing Front Headlamp Bulbs on Ford Focus
Replacing Front Headlamp Bulbs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are the front headlamp bulbs on your Ford Focus blown? Let's replace them. Open the bonnet by pulling the lever located at the bottom right of the da…
How to Disassemble the Front Headlamp of the Ford Focus
How to Disassemble the Front Headlamp of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Do you want to replace the front headlamp or the bulbs? Let's see how to disassemble the front headlamp on a Focus. Lift the bonnet and locate the pl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos