Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Starter motor

See other generations:
Video tutorial

This guide provides instructions for removing and replacing the starter motor on the Ford Ecosport. First, open the bonnet and disconnect the battery.

Then, unscrew the mounting bolts of the starter motor using a socket or spanner, and disconnect its electrical wiring to remove it. Now, install the new original starter motor, reconnect the electrical wiring, and test its operation by following the video to the end!


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Remove the Insert from the Front Door Panel of a Ford Ecosport
How to Remove the Insert from the Front Door Panel of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you can start, open the front door of your Ford Ecosport. Begin by inserting the tip of a flathead screwdriver into the gap between the insert…
How to Replace the Rear Drum Brake on a Ford Ecosport
How to Replace the Rear Drum Brake on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before starting, lift the rear end of your Ford Ecosport. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, unscrew and…
How to Open the Boot Lid of a Ford Ecosport
How to Open the Boot Lid of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you start, exit the cabin of your Ford Ecosport and head to the rear boot lid. Begin by grasping and pulling the handle located inside the rig…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos