Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on a Ford Focus 2.0L

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Starter motor

Today, you will learn how to remove and replace the starter motor on a Ford Focus 2.0L. First, open the bonnet and disconnect the battery. Next, locate the starter motor at the bottom of the engine bay, behind the intake duct, as shown in the video. Disconnect the electrical wiring from the starter motor and unscrew its mounting bolts to remove it, replacing it with a new original one. Once connected, check the engine's ignition!

Posted on 2 October 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the starter motor of the Ford Focus 2.0L
Guide to replacing the starter motor of the Ford Focus 2.0L
Ford Focus (2011-2018 / MK 3) Let's go through the main steps on how to disassemble and replace the starter motor of the Ford Focus 2.0L. First, we open the hood of the vehicle an…
How to Remove the Starter Motor on a Ford Focus
How to Remove the Starter Motor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Open the front bonnet and secure it; disconnect the starter motor power terminals using pliers or a screwdriver, depending on the pressure of the tab…
Replacing the Starter Motor on a Ford Focus
Replacing the Starter Motor on a Ford Focus
Ford Focus (1998-2004 / MK 1) Replacing the starter motor on a Ford Focus? First, open the front bonnet and disconnect the battery terminals. Locate the starter motor in the engin…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2018-2025 - Where is the starter motor located on my Ford Focus 1.6 Tdci? Read answer

How to Replace the Key Battery in a Skoda Karoq

Replacing the button battery in your new Skoda Karoq key takes just a few minutes and can be done independently. Simply follow these steps. First, press the lower button of the cover while simultaneously pulling out the physical emergency key. Then, using a small flat screwdriver, remove the rear cover to access the exhausted battery. Remove the old battery and replace it with a new compatible model (CR2032). Finally, reattach the rear cover and insert the physical key back in.

Watch the video!


by ScegliAuto

More videos