Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the starter motor of the Ford Focus 2.0L

Model: Ford Focus MK 3 - Years 2011-2018
Part: Starter motor

Let's go through the main steps on how to disassemble and replace the starter motor of the Ford Focus 2.0L. First, we open the hood of the vehicle and start by disconnecting and removing the intake duct, unscrewing the upper screws of the starter motor that we find below; to complete the operation, it will be necessary to lift the vehicle, unscrewing the lower screws and disconnecting the electrical wiring of the starter motor, as shown in the video. At this point, we replace the starter motor with the new original one, finally checking the correct ignition of the engine!

Posted on 21 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor from a Ford Focus
Removing the Starter Motor from a Ford Focus
Ford Focus (2011-2018 / MK 3) In this video tutorial, follow the main steps to remove the starter motor from a Ford Focus. First, open the bonnet and disconnect the battery termin…
Replacing the Starter Motor on a Ford Focus
Replacing the Starter Motor on a Ford Focus
Ford Focus (1998-2004 / MK 1) Replacing the starter motor on a Ford Focus? First, open the front bonnet and disconnect the battery terminals. Locate the starter motor in the engin…
Removing the Starter Motor on Ford Focus
Removing the Starter Motor on Ford Focus
Ford Focus (1998-2004 / MK 1) Is the starter motor on your Ford Focus damaged? Let's see how to remove it from the engine bay. Open the bonnet, disconnect the battery power connec…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2018-2025 - Where is the starter motor located on my Ford Focus 1.6 Tdci? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos