Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor from a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Starter motor

In this video tutorial, follow the main steps to remove the starter motor from a Ford Focus. First, open the bonnet and disconnect the battery terminals. Then, lift the car using a jack or axle stands and locate the starter motor. Disconnect the electrical connector and use a ratchet spanner to undo the nuts securing the starter motor. Next, pull and extract the starter motor from the engine bay and replace it with the new one. Watch the video until the end for further clarifications.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor on Ford Focus
Removing the Starter Motor on Ford Focus
Ford Focus (1998-2004 / MK 1) Is the starter motor on your Ford Focus damaged? Let's see how to remove it from the engine bay. Open the bonnet, disconnect the battery power connec…
How to Remove the Starter Motor on a Ford Focus
How to Remove the Starter Motor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Open the front bonnet and secure it; disconnect the starter motor power terminals using pliers or a screwdriver, depending on the pressure of the tab…
Guide to replacing the starter motor of the Ford Focus 2.0L
Guide to replacing the starter motor of the Ford Focus 2.0L
Ford Focus (2011-2018 / MK 3) Let's go through the main steps on how to disassemble and replace the starter motor of the Ford Focus 2.0L. First, we open the hood of the vehicle an…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2018-2025 - Where is the starter motor located on my Ford Focus 1.6 Tdci? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos