Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Removing the starter motor on Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Starter motor
Operation: Removing the starter motor on Ford Focus

Is the Ford Focus moped damaged? Let's see how it is removed from inside the engine compartment. We open the engine hood, disconnect the battery power terminals. We lift the car with a column bridge and identify the starter motor. We disconnect the starter motor clamps, unscrew the starter locking pins with a socket wrench and remove the starter motor from the engine compartment. We assemble the new ignition motor with the connection of the power supply cables and with the attached tightening screws. Finally we can connect the terminals to the battery and see how it works.


Posted on 10 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2018-2025 - Where is the Ford Focus starter motor located? Read Answer
    • Focus 2004-2011 - Where is the starter motor located in the Ford Focus mk2? Read Answer
    • Focus 2011-2018 - What is the price of the starter motor of the Ford Focus 1 6 tdci? Read Answer
    • Focus 1998-2004 - What problems does the starter motor of the Ford Focus have? Read Answer
    • Focus 2018-2025 - Where is the starter motor located on my Ford Focus 1.6 Tdci? Read Answer
    • Focus 2004-2011 - How much is the starter motor of the Ford Focus 1.8 TDCI? Read Answer
    • Focus 1998-2004 - How much does the 2004 Ford Focus starter motor cost? Read Answer
    • Focus 1998-2004 - Where is the starter motor of the Ford Focus 1.8 TDCi located Read Answer

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos