Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : Removing the starter motor on Ford Focus 1.6 TDCi MK2

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Starter motor
Operation: Removing the starter motor on Ford Focus 1.6 TDCi MK2

Let's see how to remove the starter motor on a Ford Focus 1.6 TDCi second series, following the instructions below. First of all we open the bonnet of our car and we go to disconnect the intake hose from the turbine, loosening the clamp screw; after which we disconnect the electrical connector of the mass air flow sensor and remove the entire air filter box, as shown in the video. At this point we proceed with the removal of the battery, unscrewing the screws of the terminals, and once removed we also remove the battery holder. We just have to unscrew the nuts of the starter motor and disconnect its electrical connector to remove it!


Posted on 17 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2018-2025 - Where is the Ford Focus starter motor located? Read Answer
    • Focus 2004-2011 - Where is the starter motor located in the Ford Focus mk2? Read Answer
    • Focus 2011-2018 - What is the price of the starter motor of the Ford Focus 1 6 tdci? Read Answer
    • Focus 1998-2004 - What problems does the starter motor of the Ford Focus have? Read Answer
    • Focus 2018-2025 - Where is the starter motor located on my Ford Focus 1.6 Tdci? Read Answer
    • Focus 2004-2011 - How much is the starter motor of the Ford Focus 1.8 TDCI? Read Answer
    • Focus 1998-2004 - How much does the 2004 Ford Focus starter motor cost? Read Answer
    • Focus 1998-2004 - Where is the starter motor of the Ford Focus 1.8 TDCi located Read Answer

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos