Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Removing the injectors on the Ford Focus MK2 1.6 TDCi

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Injectors
Operation: Removing the injectors on the Ford Focus MK2 1.6 TDCi

In this video tutorial we will see how to remove and replace the diesel injectors on the Ford Focus 1.6 TDCi, second series, in simple and quick steps. First of all we open the engine hood of our car and we go to remove the upper protection of the engine; then we are going to remove the pins of the injector connections with a pair of pliers, disconnecting the four electrical connectors. At this point we unscrew the two injector nuts that we find on the base; now we can remove the injector, proceeding with the cleaning or directly with the replacement. Follow the video to the end!


Posted on 4 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How much do the Ford Focus 1.6 TDCi injectors cost? Read Answer
    • Focus 2004-2011 - What problems do Ford Focus injectors have? Read Answer
    • Focus 1998-2004 - Does the Ford Focus 1.6 TDCi have problems with the injectors? Read Answer
    • Focus 2004-2011 - How to replace the injectors in a diesel-powered Ford Focus? Read Answer
    • Focus 2004-2011 - How much do Ford Focus diesel injectors cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos