Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

To change the battery in a Ford Ecosport, open the bonnet and locate the battery in the engine bay. Remove the plastic cover above the battery and then disconnect the negative clamp first, followed by the positive clamp. Unscrew the support or bracket that secures the battery in place.

Carefully lift the battery out of its housing. Position the new battery in the same orientation as the previous one and reattach the securing bracket.

Connect the positive clamp first, then the negative clamp, ensuring they are tight, and then close the bonnet.


Posted on 13 September 2026 by ScegliAuto


Related tutorials

Replacing the Battery in a 2018 Ford Ecosport
Replacing the Battery in a 2018 Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Today, learn how to change the battery in a 2018 Ford Ecosport. Start by opening the bonnet and securing it. Next, using an 8 mm spanner, remove the …
How to Change the Remote Battery of a Ford Ecosport Mk1
How to Change the Remote Battery of a Ford Ecosport Mk1
Ford Ecosport (2003-2012 / Bv226) To change the battery in the remote of a Ford Ecosport MK1, take the remote and use a small screwdriver to pry apart the two halves of the remote. On…
How to change the battery of a Ford Ecosport key.
How to change the battery of a Ford Ecosport key.
Ford Ecosport (2012-2023 / BK, MK 1) We can see in this tutorial how to change the battery of a Ford Ecosport remote control. So first of all, let's extract the physical emergency key fr…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos