Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery of a Ford Ecosport 2018.

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Battery

Today we will see how to change the battery of a 2018 Ford Ecosport. Let's start the operation by opening the hood and securing it, then, with an 8mm key, we unscrew the two screws that hold the fuse box of the battery in place and remove it as shown in the video. Once this is done, with a 10mm key, we remove the negative pole of the battery first and then the positive one, then we remove the two nuts of the battery fixing bar and remove it, finally we extract the old battery and replace it with a new one following the reverse procedure.

Posted on 29 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery for the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) One of the causes of a malfunctioning vehicle key is a flat remote battery. Replacing the battery in a Ford Ecosport remote is a very simple and quic…
How to replace the battery of the Ford Ecosport car remote control
How to replace the battery of the Ford Ecosport car remote control
Ford Ecosport (2012-2023 / BK, MK 1) To replace the battery of the Ford Ecosport car remote, we need to lift the metal key and insert a flat-head screwdriver along the side perimeter of …
How to Replace the Key Battery on a Ford EcoSport
How to Replace the Key Battery on a Ford EcoSport
Ford Ecosport (2012-2023 / BK, MK 1) In this video, see how to replace the battery in a Ford EcoSport key. First, get a small flathead screwdriver. Use the screwdriver to pry off the cov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos