Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To perform the oil change on the Garelli Tiger Cross, you need to unscrew the drain plug of the oil pan located in the central lower part of the vehicle. Once this plug has been removed, you can proceed by draining all the oil into a properly positioned container. Then you will also need to remove the oil filter located in the same position; now you can insert the new filter and proceed with topping up. You will need to pour the necessary amount of oil from the vent on the right side of the vehicle.

Posted on 8 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cylinder on the Garelli Tiger Cross?
How to Replace the Cylinder on the Garelli Tiger Cross?
Tiger Cross To replace the cylinder on the Garelli Tiger Cross, access the side of the engine so that the cylinder's fixing screws on the top can be loosened. Th…
How do you replace the rear shock absorber of the Garelli Tiger Cross?
How do you replace the rear shock absorber of the Garelli Tiger Cross?
Tiger Cross To replace the rear shock absorber on the Garelli Tiger Cross, you need to loosen the screws that secure this component to its housing: the screws th…
How to Dismantle the Engine of the Garelli Tiger Cross?
How to Dismantle the Engine of the Garelli Tiger Cross?
Tiger Cross To dismantle the engine of the Garelli Tiger Cross, remove it from its housing at the bottom of the motorcycle: after disconnecting the mounting bolt…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos