Do it yourself
Frequently asked questions about cars and motorcycles
To replace the cylinder on the Garelli Tiger Cross, access the side of the engine so that the cylinder's fixing screws on the top can be loosened. Then, disconnect all relevant connectors and sensors so that the old cylinder can be completely removed from its housing; after removal, it will be possible to reposition the piston by placing the cylinder back on top of the engine. This must be secured and connected properly to ensure everything functions correctly.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Tiger Cross To replace the rear shock absorber on the Garelli Tiger Cross, you need to loosen the screws that secure this component to its housing: the screws th…
Tiger Cross To perform the oil change on the Garelli Tiger Cross, you need to unscrew the drain plug of the oil pan located in the central lower part of the vehi…
Tiger Cross To dismantle the engine of the Garelli Tiger Cross, remove it from its housing at the bottom of the motorcycle: after disconnecting the mounting bolt…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos