|
Do it yourself
| |||
| ||||
How to Remove and Replace the Carburettor on a Garelli 50
Model: Garelli Garelli
Video tutorial
In this guide, we will provide instructions to remove and replace the carburettor on a Garelli 50. First, place it on the centre stand and start by disconnecting the air and throttle cables, then disconnect the tubing; next, unscrew the clamp screw of the intake duct, disconnecting the carburettor as shown in the video. Now, clean or replace the carburettor, reassemble it, and reconnect all lines; open the fuel tap and start the engine, checking for proper operation!
Posted on 22 April 2026 by ScegliAuto
Related tutorials
In this video tutorial, you will find the instructions that will allow you to overhaul the carburettor of the Garelli, as well as the Piaggio Si and …
In this short video, see the steps to clean the carburettor on your Garelli 50cc, as well as on the Piaggio Si, Ciao, and Bravo. First, remove the ca…
This guide explains how to start the Garelli engine after many years of inactivity, following the instructions below. First, put the central stand do…
|
How to replace the air filter on the Aprilia Tuareg 660?
To replace the air filter on the Aprilia Tuareg 660, loosen the screws securing the panel located at the front of the vehicle, just behind the handlebars. Once these screws are loosened, remove the panel to access the underlying filter. The old filter can be extracted, and a new one can be inserted into its housing. After replacement, cover the filter with the panel and check that the engine is running properly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |