Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Carburettor on the Garelli

Model: Garelli Garelli
Part: Carburetor

Video tutorial

In this short video, see the steps to clean the carburettor on your Garelli 50cc, as well as on the Piaggio Si, Ciao, and Bravo. First, remove the carburettor from the engine by disconnecting the fuel hose and unscrewing the screw at the carburettor inlet; then disconnect the throttle cable.

Now, unscrew the screws of the lower bowl to access the idle and main jets; unscrew and remove them, clean them, and then replace the bowl gasket. Also, clean the fuel filter by unscrewing the screw at the inlet of the hose!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Carburettor on a Garelli 50
How to Remove and Replace the Carburettor on a Garelli 50
In this guide, we will provide instructions to remove and replace the carburettor on a Garelli 50. First, place it on the centre stand and start by d…
How to Overhaul the Carburettor of the Garelli
How to Overhaul the Carburettor of the Garelli
In this video tutorial, you will find the instructions that will allow you to overhaul the carburettor of the Garelli, as well as the Piaggio Si and …
How to start a Garelli after many years
How to start a Garelli after many years
This guide explains how to start the Garelli engine after many years of inactivity, following the instructions below. First, put the central stand do…

How to Replace the Rear View Mirror on the Harley Davidson Touring

To replace the rear view mirror on the Harley Davidson Touring, loosen the screws that secure the mirror to its housing on the side of the handlebar: the nut that holds the mirror will be located at the bottom of the corresponding grip. Once it has been removed from its position, you can proceed to place the new one at the top: you will now need to secure it by reinserting the nut at the bottom and adjust the angle of the mirror according to your needs. The same operation can be performed on the other side.

Watch the video!


by ScegliAuto

More videos