Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Garelli 1978
Part: Engine oil

Start the engine for a few minutes to make the oil more fluid, facilitating its subsequent drainage. Remove the bolt for the upper fill hole, located to the side of the tank (see video), and unscrew the screw that acts as a plug for the drain hole, usually located at the bottom of the bike and often centrally (as in our case). Collect the used oil in a container. It is recommended for this particular model and similar models to use 80W-85 oil. Measure the amount of oil drained, close the lower hole, and pour the same amount from the fill hole.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Change on Garelli Ciclone
Oil Change on Garelli Ciclone
Ciclone Today, perform the simplest and most common maintenance on the Garelli Ciclone: the engine oil change. Start the engine for a few minutes to warm the…
How do you replace the gearbox oil of the Garelli Eureka Flex?
How do you replace the gearbox oil of the Garelli Eureka Flex?
Eureka Flex In order to replace the gearbox oil of the Garelli Eureka Flex, you need to loosen the drain plug located under the transmission. Once this has been …
How to replace the transmission oil in a Garelli Eureka Flex?
How to replace the transmission oil in a Garelli Eureka Flex?
Eureka Flex To replace the variator oil of our Garelli Eureka Flex, make sure the engine is cold. Lift the motorcycle on a stand. Remove the oil tank cap and the…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos