Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the gearbox oil of the Garelli Eureka Flex?

Model: Garelli Eureka Flex
Part: Transmission fluid

Video tutorial

To replace the gearbox oil of the Garelli Eureka Flex, you need to loosen the drain plug of the tank that contains the gearbox oil: this will be located at the bottom of the transmission cover. Once this plug has been removed, you can let all the used oil flow into a suitably positioned container; once all the oil has drained out, you need to insert the necessary amount of fluid through the vent from which the drainage was done.

A pump will be necessary to perform this topping up.


Posted on 17 January 2026 by ScegliAuto


Related tutorials

How do you replace the gearbox oil of the Garelli Eureka Flex?
How do you replace the gearbox oil of the Garelli Eureka Flex?
Eureka Flex In order to replace the gearbox oil of the Garelli Eureka Flex, you need to loosen the drain plug located under the transmission. Once this has been …
How to replace the variator oil of a Garelli Eureka Flex?
How to replace the variator oil of a Garelli Eureka Flex?
Eureka Flex To replace the variator oil in your Garelli Eureka Flex, ensure the engine is cold. Lift the motorcycle onto a stand. Remove the oil tank cap and the…
How do you disassemble the engine of the Garelli Eureka?
How do you disassemble the engine of the Garelli Eureka?
Eureka Flex To disassemble the engine of the Garelli Eureka, you need to loosen the screws that secure it to its housing in the center of the frame. To free the …

How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?

In this tutorial, you will see how to replace the front headlight bulbs in the Aprilia Tuono V4 1100, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by positioning yourself near the headlight in question, then locate and open the circular cap at the back of it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from its housing. Finally, insert the replacement bulb without touching the glass with bare hands and follow the reverse procedure to reassemble everything.

Watch the video!


by ScegliAuto

More videos