Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To disassemble the engine of the Garelli Eureka, you need to loosen the screws that secure it to its housing in the center of the frame. To free the engine, you will also need to disconnect the intake and exhaust manifolds and remove all the connectors related to their sensors. At this point, it will be possible to open the engine by loosening the screws that hold the cylinder in place so that it can be removed. You will then be able to detach the piston from the connecting rod, allowing access to the internal components of the engine block and replacing them as needed.

Posted on 30 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the transmission oil in a Garelli Eureka Flex?
How to replace the transmission oil in a Garelli Eureka Flex?
Eureka Flex To replace the variator oil of our Garelli Eureka Flex, make sure the engine is cold. Lift the motorcycle on a stand. Remove the oil tank cap and the…
How do you replace the gearbox oil of the Garelli Eureka Flex?
How do you replace the gearbox oil of the Garelli Eureka Flex?
Eureka Flex In order to replace the gearbox oil of the Garelli Eureka Flex, you need to loosen the drain plug located under the transmission. Once this has been …
How do you replace the gearbox oil of the Garelli Eureka Flex?
How do you replace the gearbox oil of the Garelli Eureka Flex?
Eureka Flex To replace the gearbox oil of the Garelli Eureka Flex, you need to loosen the drain plug of the tank that contains the gearbox oil: this will be loca…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos