Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the variator oil of our Garelli Eureka Flex, make sure the engine is cold. Lift the motorcycle on a stand. Remove the oil tank cap and the oil drain cap. Place a drainage container under the drain plug. Unscrew the drain plug and let the used oil drain. Screw the drain plug back in and fill the variator with new oil. Finally, check the oil level and tighten the caps securely. Once we have completed this step, we will have finished replacing the variator oil of our Garelli Eureka Flex.

Posted on 13 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the gearbox oil of the Garelli Eureka Flex?
How do you replace the gearbox oil of the Garelli Eureka Flex?
Eureka Flex To replace the gearbox oil of the Garelli Eureka Flex, you need to loosen the drain plug of the tank that contains the gearbox oil: this will be loca…
How do you replace the gearbox oil of the Garelli Eureka Flex?
How do you replace the gearbox oil of the Garelli Eureka Flex?
Eureka Flex In order to replace the gearbox oil of the Garelli Eureka Flex, you need to loosen the drain plug located under the transmission. Once this has been …
How do you disassemble the engine of the Garelli Eureka?
How do you disassemble the engine of the Garelli Eureka?
Eureka Flex To disassemble the engine of the Garelli Eureka, you need to loosen the screws that secure it to its housing in the center of the frame. To free the …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos