Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Shoes on a Garelli Super Sport XL

Model: Garelli Super Sport
Part: Checks and maintenance

Video tutorial

To replace the front brake shoes on the Garelli Super Sport, loosen the nuts that secure the central axle of the front wheel so that it can be removed from the forks. Once the wheel is removed, open the screws that secure the drum to access the shoes inside.

These can then be disconnected from the cable and replaced with two new replacement parts. After installing the new shoes, remount the wheel using the appropriate axle.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Replacing the Clutch on Garelli Super Sport (NOI Engine)
Replacing the Clutch on Garelli Super Sport (NOI Engine)
Super Sport In today's video, we will see the instructions that will allow us to remove and replace the clutch on a Garelli Super Sport. First, drain the engine …
How to replace the exhaust on a Garelli Super Sport?
How to replace the exhaust on a Garelli Super Sport?
Super Sport To replace the exhaust on the Garelli Super Sport, loosen the screws that secure the exhaust to the left side of the bike, near the rear wheel. Once …
How to Remove the Engine from a Garelli Super Sport XL?
How to Remove the Engine from a Garelli Super Sport XL?
Super Sport To remove the engine from a Garelli Super Sport XL, you need to loosen the screws that secure the engine block to its housing in the central part of …

How to Replace the Air Filter in a Moto Guzzi Nevada 750?

In this tutorial, you will see how to replace the air filter in a Moto Guzzi Nevada 750, a very simple and quick operation. First, wait for the engine to be completely cold, then remove the seat, disassemble the chrome air intake, and subsequently the panel located under the tank. Repeat the operation on the opposite side, disconnect both the fuel hoses and the pump connector, and remove the tank itself. At this point, you can move all the cables above the airbox, open it, and remove the old filter. To install the replacement and reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos