Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The replacement of the GasGas SM 700 exhaust can be carried out by unscrewing the screws that fix the seat to its housing: these screws will be located at the rear fender, just behind the seat. After removing them, you can proceed by loosening the screws that fix the left side panel of the vehicle, locating the exhaust underneath: the exhaust can be freed by removing the screws that fix it to its supports and disconnecting the screws that connect it to the exhaust pipe. At this point, it will be possible to insert the new piece, checking its functioning.

Posted on 21 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the GasGas SM 700?
How do you replace the exhaust pipe of the GasGas SM 700?
Sm 700 The procedure for replacing the exhaust on the GasGas SM 700 can be done by loosening the screws that secure the right side panel of the rear fender:…
How do you replace the exhaust pipe of the GasGas SM 700?
How do you replace the exhaust pipe of the GasGas SM 700?
Sm 700 In order to replace the exhaust of the GasGas SM 700, you need to loosen the screws that secure the seat to its housing: these screws are located on …
How do you replace the exhaust pipe of the GasGas SM 700?
How do you replace the exhaust pipe of the GasGas SM 700?
Sm 700 The exhaust pipe installed on the GasGas SM 700 can be replaced by loosening the screws that secure the right side panel of the corresponding fender …

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos