Do it yourself
Frequently asked questions about cars and motorcycles

Model: Gasgas Ec 300
Part: Engine oil

Is it time to change the oil in your GasGas? You're in the right place. Place some open cardboard under the bike to avoid excessive mess on the floor. On top of the cardboard, position a container for the used oil. With the engine cold, use a spanner to unscrew the sump plug; if it falls into the oil, you can retrieve it later. It's advisable to replace the oil filter every time you perform this task. Next, stand the bike upright and unscrew the cap where the new oil is added. Once it stops dripping, you can screw the bolt back under the sump. Now introduce the new oil.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Ec 300 In this video, we will see the instructions for changing the engine oil while performing the regular maintenance service on a Gasgas EC 300 enduro bi…
Ec 300 Briefly, we will go through the procedure to drain and refill the transmission oil of the Gasgas EC 300 2-stroke enduro bike. First, place the bike o…
Ec 300 In this guide, we will go over the instructions that will allow us to perform the routine maintenance service by replacing the engine oil of the Gasg…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos