Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Clutch from a Gasgas TXT 125

Model: Gasgas Txt 125
Part: Clutch

Video tutorial

This tutorial shows how to remove the clutch from a Gasgas TXT 125, following these simple steps. First, drain the oil from your bike by unscrewing the drain bolt located under the engine; then, unscrew the fixing screws of the clutch cover on the right side.

Now, access the clutch pack, where you will unscrew the fixing screws to remove its discs; replace them with new ones of the correct type, alternating between cork and metal discs. Remember to replace the clutch cover gasket.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Txt 125 You can replace the clutch on the GasGas TXT 125 by loosening the screws that secure the cover panel on the left side of the bike: once this panel is…
Txt 125 To replace the clutch on a GasGas TXT 125, loosen the screws securing the cover on the right side of the engine: this will allow you to remove the co…
Txt 125 To replace the water pump on the GasGas TXT 125, locate the pump on the right side of the bike, next to the clutch cover. To remove the water pump, d…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos