Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Caliper on a GasGas TXT 125

Model: Gasgas Txt 125
Part: Checks and maintenance

Video tutorial

To replace the rear brake caliper on a GasGas TXT 125, first loosen the nuts securing the rear wheel spindle. Once the spindle is removed, you can take off the rear wheel to access the caliper: detach it from the disc and disconnect the appropriate cable to install a new replacement part.

After replacement, secure the new caliper to the disc and remount the rear wheel, inserting the locking spindle and tightening it with the appropriate nuts.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a GasGas TXT 125
How to Replace the Exhaust on a GasGas TXT 125
Txt 125 You can replace the exhaust on the GasGas TXT 125 by loosening the screws that secure the exhaust end can to the appropriate supports: these are loca…
How to Replace the Water Pump on the GasGas TXT 125?
How to Replace the Water Pump on the GasGas TXT 125?
Txt 125 To replace the water pump on the GasGas TXT 125, locate the pump on the right side of the bike, next to the clutch cover. To remove the water pump, d…
How do you replace the gear lever on the GasGas TXT 125?
How do you replace the gear lever on the GasGas TXT 125?
Txt 125 In order to replace the gear shift lever of the GasGas TXT 125, you need to loosen the nut that fixes it to the external part of the gearbox, on the …

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos