Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the starter motor on the GasGas EC 300, first loosen the screws securing the seat to its housing so that it can be completely removed. After removing the seat, you can also unscrew the screws securing the side panels next to the seat. Beneath them, on the left side, you will have access to the starter motor, which needs to be disconnected and freed from the mounting bolts. This will allow you to fit the new replacement part, reassembling the seat and side panels.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing Starter Motor on Gasgas EC 250-300
Installing Starter Motor on Gasgas EC 250-300
Ec 300 In today's tutorial video, you will see how to install the starter motor on a Gasgas EC 250 and 300, following the instructions below. First, grease …
How to replace the starter motor on the GasGas EC 300
How to replace the starter motor on the GasGas EC 300
Ec 300 To replace the starter motor on the GasGas EC 300, detach the left side fairing of the bike, located near the bottom of the fuel tank. Once the panel…
Instructions for disassembling the starter motor on a Gasgas EC 300
Instructions for disassembling the starter motor on a Gasgas EC 300
Ec 300 In this video tutorial, you will see instructions on how to disassemble and replace the electric starter motor on a Gasgas EC 300 motorcycle. First, …

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos