Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Crankshaft Bearings on the GasGas EC 300?

Model: Gasgas Ec 300
Part: Bearing

Video tutorial

To replace the crankshaft bearings on the GasGas EC 300, you need to remove the engine from its housing by unscrewing the bolts that secure it to the mounts and disconnecting it from the exhaust pipes. This will allow you to unscrew the bolts that hold the two half-casings and access the components inside the engine compartment: the bearings can then be pulled out from their housing and replaced with new spare parts.

After replacement, reinsert the components back into the engine block and reassemble it.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

Replacing the Crankshaft Oil Seal on Gasgas EC 300
Replacing the Crankshaft Oil Seal on Gasgas EC 300
Ec 300 In this video, we will see how to remove and replace the crankshaft oil seal on a Gasgas EC 300 enduro bike, following the instructions below. First,…
How to Perform a Full Service on a Gasgas EC 300
How to Perform a Full Service on a Gasgas EC 300
Ec 300 In this tutorial, learn how to carry out a full service on the Gasgas EC 300 by following the instructions below. First, remove the wheels from your …
Replacing Crankshaft Oil Seal Gasgas EC 300
Replacing Crankshaft Oil Seal Gasgas EC 300
Ec 300 In this video tutorial, you will learn how to dismantle and replace the crankshaft oil seal on a Gasgas EC 300. First, remove the cover/protection of…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos