|
Do it yourself
| |||
| ||||
Model: Gasgas Sm 700
To install the USB socket on the GasGas SM 700, loosen the screws securing the front headlamp to its housing so that it can be removed along with the corresponding trim. Once the headlamp is detached, proceed to install the socket at the rear of its housing, ensuring the power is taken from the ground wire connected to the headlamp. At this point, reposition the optical unit in its place, securing it with the screws and checking that the socket functions correctly.
Updated on 2 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Sm 700
To install the windscreen on the GasGas SM 700, first, loosen the screws securing the front fairing, disconnecting the connector at the back of the f…
Sm 700
The replacement of the GasGas SM 700 exhaust can be carried out by unscrewing the screws that fix the seat to its housing: these screws will be locat…
Sm 700
The main instructions provided in this guide will show us how to disassemble and replace the cover or clutch cover of the Gasgas SM 700 motorcycle. F…
|
Where are the fuses located on the Piaggio Vespa GTS 125?
The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |