Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the front fender of the Geely CK?

Model: Geely Ck MK 1 - Years 2005-2016
Part: Checks and maintenance

In order to remove the front fender of the Geely CK it is necessary to loosen the screws that secure the front bumper, opening the hood and unscrewing the screws in its upper part. When the screws have been loosened, it will be possible to go and detach the bumper, so that you can then access the fixing screws of the fender. These will be located in its upper part and inside the wheel arches: after the screws have been removed, it will be possible to detach the fender from its housing, replacing it with a new one and fitting all the components previously removed.

Posted on 13 November 2022 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Geely CK
Disassembly of the front door panel of the Geely CK
Geely Ck (2005-2016 / MK 1) We see in this guide the instructions that will allow us to remove and replace the front door panel of the Geely CK. First of all, we open the front …
Geely CK front door panel removal
Geely CK front door panel removal
Geely Ck (2005-2016 / MK 1) In today's video we will see the procedure necessary for the disassembly and replacement of the front door panel of the Geely CK. First of all, we op…
How do you replace the brake pads on the Geely CK?
How do you replace the brake pads on the Geely CK?
Geely Ck (2005-2016 / MK 1) To be able to replace the brake pads of the Geely CK you have to go and lift the car, so that the corresponding wheel is not in contact with the grou…

Other guides you may be interested in

How to Reset the Service Light on a Fiat 500

In this video, learn how to reset the oil maintenance service indicator on a Fiat 500. This is a very simple operation. Enter the vehicle and turn on the ignition. Press the accelerator pedal three times in quick succession, then release the pedal. Turn off the ignition and remove the key from the ignition lock. Reinsert the key and turn on the ignition, then wait for the indicator to illuminate. Finally, check the changes made to the car. Always remember to perform onboard computer modifications with the engine off.

Watch the video!


by ScegliAuto

More videos