Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads on the Geely CK?

Model: Geely Ck MK 1 - Years 2005-2016
Part: Brake pads

To replace the brake pads on the Geely CK, lift the vehicle so that the corresponding wheel is off the ground. Once the wheel is lifted, loosen the bolts that secure the wheel to access the underlying components. Here, you will find the brake caliper, which needs to be removed from the brake rotor by unscrewing its fastening bolts. When the caliper is detached, you can slide out the pads inside it to replace them with new replacement parts; finally, reinstall all removed parts.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on a Geely CK
How to Replace the Starter Motor on a Geely CK
Geely Ck (2005-2016 / MK 1) To replace the starter motor on a Geely CK, open the hood to access the components in the engine bay: the starter motor is located at the rear of the…
Replacing the Coolant in the Geely Ck
Replacing the Coolant in the Geely Ck
Geely Ck (2005-2016 / MK 1) Follow the procedure below to replace the coolant in the Geely Ck. First, move to the front of the vehicle and start by loosening the coolant drain p…
Removing the Front Door Panel of the Geely CK
Removing the Front Door Panel of the Geely CK
Geely Ck (2005-2016 / MK 1) Follow this guide for instructions to remove and replace the front door panel of the Geely CK. First, open the front door and start removing the vari…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos