Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Handbrake Cable on a Geely CK

Model: Geely Ck MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Parking brake

Video tutorial

In this video tutorial, you will learn how to disassemble and replace the handbrake cable on a Geely CK, following the instructions below. First, get inside the vehicle and start by removing the center console; to do this, unscrew the screws located at the front, under the side plastic covers, as shown in the video.

At this point, completely loosen the adjuster to remove the handbrake cable; then disconnect the cable from the rear brake shoes, replacing it with the new one, following the video tutorial to the end!


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace Brake Pads on the Geely CK?
How to Replace Brake Pads on the Geely CK?
Geely Ck (2005-2016 / MK 1) To replace the brake pads on the Geely CK, lift the vehicle so that the corresponding wheel is off the ground. Once the wheel is lifted, loosen the b…
Removing the Front Door Panel of the Geely CK
Removing the Front Door Panel of the Geely CK
Geely Ck (2005-2016 / MK 1) In today's video, you will see the procedure for removing and replacing the front door panel of the Geely CK. First, open the front door and start by…
How to Replace the Starter Motor on a Geely CK
How to Replace the Starter Motor on a Geely CK
Geely Ck (2005-2016 / MK 1) To replace the starter motor on a Geely CK, open the hood to access the components in the engine bay: the starter motor is located at the rear of the…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos