Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Geely Ck Coolant Replacement

Model: Geely Ck MK 1 - Years 2005-2016
Part: Antifreeze coolant

Let's see below the procedure on how to replace the coolant of the Geely Ck, following the instructions below. First of all, let's move to the front of the car and start unscrewing the coolant bleed screw, which we find at the bottom, using a socket wrench; let it drain in a container for about ten minutes. At this point, open the bonnet and unscrew the coolant filler cap, then top up; let's fill up to the maximum level, indicated by the notch!

Posted on 28 January 2023 by ScegliAuto

Video tutorial

Related tutorials

Geely CK front door panel removal
Geely CK front door panel removal
Geely Ck (2005-2016 / MK 1) In today's video we will see the procedure necessary for the disassembly and replacement of the front door panel of the Geely CK. First of all, we op…
How do you replace the starter motor of the Geely CK?
How do you replace the starter motor of the Geely CK?
Geely Ck (2005-2016 / MK 1) In order to replace the Geely CK starter motor, you need to open the hood, so that you have access to the components inside the engine compartment: t…
How to replace the cabin fan of the Geely CK.
How to replace the cabin fan of the Geely CK.
Geely Ck (2005-2016 / MK 1) In this guide, we will see the main steps that will allow us to disassemble and replace the cabin fan of the Geely CK, following the instructions bel…

How to Disassemble and Remove the Rear Camera of a Mercedes CLA

In this video, see how to disassemble and remove the camera (where the license plate light is located) from the rear hatch of a Mercedes CLA. First, open the rear hatch of the car, then remove the rear license plate. Use a screwdriver to remove the screws on the plastic trim of the hatch. Disconnect the plastic trim of the license plate light from the hatch, and use a screwdriver to remove the retaining clips (located between the hatch metal and the plastic trim). Finally, remove the rear camera located in the hatch (disconnect the power connector of the camera) of the car. For reassembly, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos