Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper of the Geely Emgrand EC7

Model: Geely Geely Various
Part: Front bumper

In this short guide, we see the main instructions for disassembling and replacing the front bumper of the Geely Emgrand EC7. First of all, open the bonnet and start unscrewing all the fixing screws located on the upper and lower part of the front bumper, removing the plastic clips; after that we unscrew the additional screws located on both sides of the wheel arches, as shown in the video. At this point we release the front bumper on the sides, until it is completely removed; we replace and reassemble the new front bumper, applying the reverse procedure of disassembly!

Posted on 12 February 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Geely Emgrand EC7.
Geely Geely Various In today's video tutorial, we will see instructions on how to disassemble and replace the headlight bulb of the Geely Emgrand EC7, following these si…
How to replace the fuel filter of the Geely Emgrand EC7
How to replace the fuel filter of the Geely Emgrand EC7
Geely Geely Various In this short guide, we will see the instructions that will allow us to disassemble and replace the fuel filter of the Geely Emgrand EC7. First, rais…
How to replace the alternator of the Geely Emgrand EC7
Geely Geely Various In today's video we will see the instructions on how to disassemble and replace the Geely Emgrand EC7 alternator. First of all we open the bonnet of …

Other guides you may be interested in

How to Remove the Driver's Door Panel on a Fiat 600

How to remove the driver's door panel on a Fiat 600? This video explains how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a screwdriver to unscrew the fastening pins on the handle located on the door panel, and unscrew the pins in the plastic of the door opening lever. Remove the handle from the door panel, then use a lever to detach the upper trim panel. Detach the glove compartment panel at the bottom of the door with the lever. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos