Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Front bumper

See other generations:
Video tutorial

Today's guide will illustrate the steps on how to remove and replace the front bumper of a Peugeot 308. First, open the vehicle's bonnet and start unscrewing all the fastening screws found at the top of the bumper, also removing the plastic clips; remove the additional screws located on both sides of the wheel arches, gently releasing the bumper from the sides until it is completely removed, as shown in the video.

At this point, repair or replace the front bumper with the new one, securing it properly with the original screws and clips.


Posted on 21 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Peugeot 308?
How to Remove the Front Bumper of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the front bumper of the Peugeot 308, open the bonnet to access the screws securing the bumper from the top. Once these screws are loosened,…
How to Remove the Front Bumper of the Peugeot 308
How to Remove the Front Bumper of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) The video today will show you how to remove and replace the front bumper of the Peugeot 308, following the instructions below. First, open the bonnet…
Removing the Front Bumper of a Peugeot 308
Removing the Front Bumper of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the front bumper of a Peugeot 308? Follow these steps to disassemble the parts for removing the front bumper. Lift the front bonnet…

    Frequently Asked Questions

    • 308 2013-2021 - How to disassemble the bumper in the Peugeot 308 t9? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos