Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. Genesis G70
    4. : Door panel

Genesis G70 - Door panel

Genesis G70 (2018-2024 / MK 1)
Disassembly of the Genesis G70 front door panel
Let's find out below the main instructions that will allow us to remove the front door panel of the Genesis G70. First of all we open the front door and start …read all…
Posted on 7 October 2022 by ScegliAuto
Car stereo (2) Spark plugs (2) Key (2) -board computer (3) Checks and maintenance (1) Brake discs (1) Cabin air filter (2) Accessory Kit (1) Rear light bulb (1) Engine (1) Engine oil (1) Door panel (1) Front bumper (1) Brake pads (2) Door (1) Instrument cluster (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos