Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Genesis
  4. :
  5. Genesis G70
  6. : Brake pads

Genesis G70 - Brake pads

Genesis G70 (2018-2024 / MK 1)
How to replace the front brake pads of the Genesis G70.

In today's video tutorial, we will see how to disassemble and replace the front brake pads of the Genesis G70, following the instructions below. First, we …read all…
Posted on 14 May 2023 by ScegliAuto
Genesis G70 (2018-2024 / MK 1)
How do i replace the brake pads on the Genesis G70?

The replacement of the brake pads of the Genesis G70 is the same for both the rear and the front wheels. It will be necessary to go and lift the car, so that …read all…
Posted on 4 May 2024 by ScegliAuto

Car stereo (2) Spark plugs (2) Key (2) -board computer (3) Checks and maintenance (1) Brake discs (1) Cabin air filter (2) Accessory Kit (1) Rear light bulb (1) Engine (1) Engine oil (1) Door panel (1) Front bumper (1) Brake pads (2) Door (1) Instrument cluster (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos