Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on the Genesis G70

Model: Genesis G70 MK 1 - Years 2018-2025
Part: Brake pads

Follow these instructions to remove and replace the rear brake pads on the Genesis G70. First, raise the vehicle and remove the rear wheel. Next, unscrew the bolts securing the rear brake caliper, applying pressure to the caliper piston as shown in the video. At this point, remove the old brake pads and replace them with new original ones, cleaning the caliper of any residual dirt first. Then, reattach the brake caliper to the rotor, and finally, reinstall the wheel.

Posted on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on a Genesis G70?
How to Replace the Brake Pads on a Genesis G70?
Genesis G70 (2018-2025 / MK 1) The procedure for replacing the brake pads on a Genesis G70 is the same for both the front and rear wheels. Lift the vehicle so that the wheels are o…
How to Replace the Front Brake Pads on the Genesis G70
How to Replace the Front Brake Pads on the Genesis G70
Genesis G70 (2018-2025 / MK 1) In today's tutorial video, you will learn how to disassemble and replace the front brake pads on the Genesis G70, following the instructions below. F…
How to Replace the Front Brake Discs on the Genesis G70
How to Replace the Front Brake Discs on the Genesis G70
Genesis G70 (2018-2025 / MK 1) In this video tutorial, learn how to remove and replace the front brake discs and pads on the Genesis G70 in simple steps. First, lift the vehicle an…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos