Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G70
    4. : How to replace the front brake pads of the Genesis G70.

Genesis G70 - Video tutorial

Model: Genesis G70 MK 1 - Years 2018-2024
Part: Brake pads
Operation: How to replace the front brake pads of the Genesis G70.

In today's video tutorial, we will see how to disassemble and replace the front brake pads of the Genesis G70, following the instructions below. First, we raise the vehicle and start removing the front wheel; then we unscrew the fastening screws of the front brake caliper, in order to remove it from the disc, as shown in the video. At this point, we remove the locking pin of the pads, removing them and replacing them with new ones (of excellent quality); we clean the caliper from dirt and reassemble everything, following the video tutorial until the end!


Posted on 14 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos