Do it yourself
| ||||
|
Genesis G70 - Door
Genesis G70 (2018-2024 / MK 1)
How to remove the interior door panel on the Genesis G70 If we want to proceed to remove the internal door panel on this car model we will find information on how to behave in the description below and in the video …read all… Posted on 20 June 2022 by ScegliAuto Car stereo (2) Spark plugs (2) Key (2) -board computer (3) Checks and maintenance (1) Brake discs (1) Cabin air filter (2) Accessory Kit (1) Rear light bulb (1) Engine (1) Engine oil (1) Door panel (1) Front bumper (1) Brake pads (2) Door (1) Instrument cluster (2) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |