Do it yourself
Frequently asked questions about cars and motorcycles

Genesis G70 - Key

Genesis G70 (2018-2024 / MK 1)
How to replace the key battery of the Hyundai Genesis G70

Replacing the battery in the key of your Hyundai Genesis G70 is certainly a maintenance operation that you can easily perform on your own and without the help …read all…
Posted on 25 April 2023 by ScegliAuto
Genesis G70 (2018-2024 / MK 1)
How to set and program the opening of the doors on the Genesis G70

On this car model it is possible to set the door locking system with the remote control key. To find out how to carry out this programming it is necessary to …read all…
Posted on 18 November 2022 by ScegliAuto

Car stereo (2) Spark plugs (2) Key (2) -board computer (3) Checks and maintenance (1) Brake discs (1) Cabin air filter (2) Accessory Kit (1) Rear light bulb (1) Engine (1) Engine oil (1) Door panel (1) Front bumper (1) Brake pads (2) Door (1) Instrument cluster (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos