Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the pedal assembly of the Genesis GV80

Model: Genesis Gv80 JX1, MK 1 - Years 2020-2026

Today in this brief and simple guide, we will see the main instructions on how to disassemble and replace the brake and accelerator pedals of the Genesis Gv80. First of all, we get into the car on the driver's side and start unscrewing the fixing screw of the accelerator pedal, which we find at the back (by removing the plastic cover located behind the pedal); we then proceed to install the new accelerator pedal or cover, as shown in the video. At this point, we disassemble and replace the brake pedal in the same way, following the video tutorial until the end!

Posted on 16 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the rear light of the Genesis GV80?
How do you remove the rear light of the Genesis GV80?
Genesis Gv80 (2020-2026 / JX1, MK 1) To replace the rear light of the Genesis GV80, you need to open the rear door of the car so that you can access the plastic cover located next to the…
How do I remove the door panel from the Genesis GV80?
How do I remove the door panel from the Genesis GV80?
Genesis Gv80 (2020-2026 / JX1, MK 1) In order to replace the door panel of the Genesis GV80 you have to unscrew its fixing screws, which are positioned in the seat of the internal handle…
How to replace the Genesis Gv80 remote control battery
How to replace the Genesis Gv80 remote control battery
Genesis Gv80 (2020-2026 / JX1, MK 1) In this brief guide, let's see the steps that will allow us to disassemble and replace the remote control battery of the Genesis Gv80 key. First of a…

How to Replace the Front Bumper on a BMW 3 Series

This simple operation will be illustrated in this short video guide. As the first step, raise the hood to access and remove the bolts securing the top of the bumper. Next, remove the bolts and clips that attach the inner fender to the rear of the bumper. This operation will need to be repeated on both sides. Also, remove the screws that secure the bottom of the bumper to the lower engine cover. Now, just pull the bumper away, being careful to disconnect the connectors at the back.

Watch the video!


by ScegliAuto

More videos