Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Gp 800
Part: Fuel filter

In order to replace the fuel filter of the Gilera GP 800, you need to completely remove the tank from its housing: the tank will be located at the rear of the motorcycle, near the underseat compartment. To remove it, you will need to remove the fairings covering it, then loosen the screws and disconnect all the tubes and connectors connected to it; this way you will be able to locate the filter at the bottom of the tank, remove it completely and insert the new one. After the replacement, you can reassemble the tank, making sure everything is functioning properly.

Posted on 20 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Gilera GP 800?
How to Replace the Fuel Filter on a Gilera GP 800?
Gp 800 To replace the fuel filter on a Gilera GP 800, remove the left side fairing to access the fuel tank located beneath it. Once you have access to the t…
How do you replace the fuel filter of the Gilera GP 800?
How do you replace the fuel filter of the Gilera GP 800?
Gp 800 In order to replace the fuel filter on the Gilera GP 800, you will need to remove the left side fairing so that you can access the fuel tank located …
Engine Oil and Oil Filter Replacement on Gilera GP 800
Engine Oil and Oil Filter Replacement on Gilera GP 800
Gp 800 In today's tutorial video, learn how to replace the engine oil and oil filter, performing the regular maintenance service on a Gilera GP 800 scooter.…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos