Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Gp 800
Part: Engine oil

In today's tutorial video, learn how to replace the engine oil and oil filter, performing the regular maintenance service on a Gilera GP 800 scooter. First, warm up the engine for a couple of minutes; then, position it on the centre stand and unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Next, remove the oil filter, which is located on the side, as shown in the video; simply hand-tighten the new filter and add the new engine oil!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter of the Gilera GP 800
How to Replace the Engine Oil and Oil Filter of the Gilera GP 800
Gp 800 Today's instructions will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter of the Gilera GP 800 s…
How to Change the Engine Oil of the Gilera GP 800?
How to Change the Engine Oil of the Gilera GP 800?
Gp 800 To change the engine oil of the Gilera GP 800, loosen the drain plug located at the central lower part of the vehicle. Once the plug is loosened, col…
How to Replace the Gearbox Oil on the Gilera GP 800?
How to Replace the Gearbox Oil on the Gilera GP 800?
Gp 800 To replace the gearbox oil on the Gilera GP 800, loosen the screws securing the side panel on the right side of the bike, near the footpeg. Under thi…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos